Enterasys SmartSwitch 6000 User Manual page 350

Built-in Commands
link_trap
Description:
Syntax:
Options:
Examples:
loopback_detect
Description:
Syntax:
Options:
Examples:
12-14 Network Tools Screens
Enables, disables, or displays the status of link traps on one or all ports.
link_trap [enable/disable/status] <PORT/all>
enable — Enables a link trap.
disable — Disables a link trap.
status — Displays link trap status.
PORT/ all — Specifies a port or all ports.
-> link_trap status
LINK TRAP STATUS:
Port 1 is ENABLED
Port 3 is ENABLED
-> link_trap disable 2
Link traps have been DISABLED on port 2
-> link_trap disable all
Link traps have been DISABLED on all ports (1-24)
-> link_trap status 3
Link traps are ENABLED on port 3
Enables, disables, or displays the status of loopback detection on Ethernet
front panel ports.
loopback_detect [enable | disable | state]
enable – Enables loopback detection on Ethernet front panel ports.
disable – Disables loopback detection on Ethernet front panel ports.
state – Indicates if loopback detection is enabled or disabled.
-> loopback_detect enable
-> loopback_detect disable
-> loopback_detect state
Loopback_detect is disabled.
Port 2 is DISABLED
Port 4 is ENABLED