Enterasys SmartSwitch 6000 User Manual page 197

Table 6-9 802.3ad Port Details Screen Field Descriptions (Continued)
Use this field...
ActorPortPriority
(Modifiable)
ActorAdminKey
(Read-Only)
PartnerAdminPort
(Modifiable)
ActorOperKey
(Read-Only)
PartnerOperPort
(Read-Only)
PartnerAdminSysPriority
(Modifiable)
PartnerAdminPortPriority
(Modifiable)
PartnerOperSysPriority
(Read-Only)
PartnerOperPortPriority
(Read-Only)
PartnerAdminSysID
(Modifiable)
ActorAdminState (hex)
(Modifiable)
PartnerOperSysID
(Read-Only)
Link Aggregation Screen (802.3ad Main Menu Screen)
To...
Set the priority value of this port (not used in this
implementation).
See the administratively assigned key value for this port.
Only ports with matching keys may aggregate.
Enter a default value for PartnerOperPort when no protocol
partner is available.
See the current operation key for this port. Only ports with
matching operation keys may aggregate.
See ActorPort on the partner switch that we are currently
attached to.
Set a default value to use for the PartnerOperSysPriority
when no protocol partner is available.
Set a default value to use for the PartnerOperPortPriority
when no protocol partner is available.
See the system priority of the partner port used to construct
this port's LAG ID.
See the port priority of the partner port (not used in this
implementation).
Set a default value to use for PartnerAdminSysID when no
protocol partner is available.
Set the administrative value for this port's Actor_State.
Allows administrative control over the values of
LACP_Activity, LACP_Timeout and Aggregation.
See system ID of this port's partner.
Port Configuration Menu Screens 6-33