Enterasys SmartSwitch 6000 User Manual page 95

Table 3-15 EAP Diagnostic Statistics Screen Field Descriptions (Continued)
Use this field...
Reauths
Authenticated
(Read-Only)
Starts
Authenticated
(Read-Only)
Logoffs
Authenticated
(Read-Only)
Backend Statistics:
Responses
(Read-Only)
Access Challenges
(Read-Only)
Other Requests To
Supp
(Read-Only)
Non-NAK resp
From Supp
(Read-Only)
Auth Successes
(Read-Only)
Auth Failures
(Read-Only)
Port Number
(Selectable)
To...
See counts of transitions from authenticated to connecting state due to a
reauthentication request.
See counts of transitions from authenticated to connecting state due to a
start from the supplicant (end-user requesting authentication).
See counts of transitions from authenticating to disconnected state due
to a logoff message from the supplicant (end-user requesting
authentication).
See counts of initial access-request frames to the authentication server.
See counts of initial access-challenge frames to the authentication server.
See counts of EAP request frames transmitted that are not EAP
notification, failure or success-type messages. This frame count
indicates that the authenticator picked an EAP method.
See counts of initial responses to an EAP request from the supplicant
(end-user requesting authentication). Count does not include EAP-NAK
frames. This count indicates that the supplicant can communicate with
the chosen EAP method.
See counts of EAP success messages from the authentication server.
Indicates that the supplicant is successfully authenticated.
See counts of EAP failure messages from the authentication server.
Indicates that the supplicant is not authenticated.
Select the port number to display the associated EAP Diagnostic
Statistics. To select a port number, use the arrow keys to highlight the
Port Number field. Then step to the correct port number using the
SPACE bar and press ENTER to display the associated port EAP
Diagnostic Statistics.
EAP Statistics Menu Screen
Accessing Local Management 3-53