Enterasys SmartSwitch 6000 User Manual page 366

Built-in Commands
show (Continued)
Options:
Examples:
12-30 Network Tools Screens
PROTOCOL — Specifies a protocol for which information will be
displayed.
TABLE — Specifies a type of table to display.
fid – Show MAC addresses for the filter database identifier (fdbId).
address – Show the address (mac) if it is known by the device.
port – Show the addresses for the port (portNumber) only.
type – Show addresses of the specified type only. Valid types are:
other, tp_learned, sr_learned, self, management, priorityq, multicast,
broadcast, staticfilt, agedout
Default – Show all MAC addresses for the device.