Enterasys SmartSwitch 6000 User Manual page 361

radius (Continued)
Options:
radius prim_secret — Sets the primary RADIUS server's shared secret.
(Cont'd)
radius sec_secret — Sets the secondary RADIUS server's shared secret.
Examples:
-> radius client
RADIUS Configuration Cli
Command Format : radius
status
clear
timeout
last_resort
retry
enable
disable
prim_secret
prim_ip
prim_auth_port
prim_acct_port
sec_secret
sec_ip
sec_auth_port
sec_acct_port
NOTES: The secret is NOT encrypted in transit; if this command is
used over TELNET then the secret may be compromised.
Examples:For maximum security, it is recommend to use a 16 to
32 character string for the shared secret code. For security
reasons, the entered code appears as asterisks (*) on the screen.
(shows Radius status)
(clears all entries)
(server timeout, seconds)
<local|remote> <accept|reject|challenge>
<number of retry attempts>
(enables radius client)
(disables radius client)
(sets primary secret)
<primary server IP>
<primary server authentication port>
<primary server acct port>
(sets secondary secret)
<secondary server IP>
<secondary server authentication port>
<secondary server acct port>
Built-in Commands
Network Tools Screens 12-25