Enterasys SmartSwitch 6000 User Manual page 199

Table 6-9 802.3ad Port Details Screen Field Descriptions (Continued)
Use this field...
ActorOperState
(Read-Only) (Continued)
PartnerAdminKey
(Modifiable)
PartnerAdminState (hex)
(Modifiable)
PartnerOperKey
(Read-Only)
PartnerOperState
(Read-Only)
Link Aggregation Screen (802.3ad Main Menu Screen)
To...
bit 5 Distributing, 1 indicates that this port is Distributing.
"Distributing" means that a port is ready to transmit
traffic. If Distributing is true a 'D' is displayed,
otherwise a '-' is displayed in this bit position.
bit 6 Defaulted, 1 indicates that this port has deFaulted.
If no protocol partner is available a port will resort to
using default information about its partner. When this
happens a port is said to be defaulted. If this bit is 1 an
'F' is displayed, otherwise a '-' is displayed in this bit
position.
bit 7 Expired, 1 indicates that we have Expired.
This indicates that no LACP PDUs have been received
for a sufficient length of time so the partner
information has expired. If this is true, an 'E' is
displayed, otherwise a '-' is displayed in this bit
position.
Set a default value to use for PartnerOperKey when no
protocol partner is available.
Set a default value to use for PartnerOperState when no
protocol partner is available.
See a default value to use for PartnerOperState when no
protocol partner is available.
See current state value of the partner port (same bits as the
ActorOperState).
Port Configuration Menu Screens 6-35