Advertisement
Table of Contents
6G302-06 and 6G306-06 Installation Guide
Errata Sheet
On page 1-9 of the 6G302-06 and 6G306-06 Gigabit Ethernet Installation Guide (Part Number
9033722-01), change Section 1.13:
From:
In the 802.1Q mode (the default mode of operation), the module functions as an 802.1D switch
until VLANs are configured.
The module provides 802.1Q switching or SecureFast Switching (SFS) Virtual Network Services
between all of the GPIM interfaces when the module is installed in a 6C105 SmartSwitch 6000
chassis. IEEE 802.1Q switching and SecureFast switching allow migration to Virtual Network
technologies without requiring the replacement of existing equipment.
When the module is installed in a 6C105 SmartSwitch 6000 chassis, SFS functionality is available
for the module. SFS functionality is not available in the Matrix E7 chassis.
To:
In the 802.1Q mode (the default mode of operation), the module functions as an 802.1D switch
until VLANs are configured.
The module provides 802.1Q switching or SecureFast Switching (SFS) Virtual Network Services
between all of the GPIM interfaces when the module is installed in a 6C105 SmartSwitch 6000 or
Matrix E7 chassis. IEEE 802.1Q switching and SecureFast switching allow migration to Virtual
Network technologies without requiring the replacement of existing equipment.
9033899
1 of 1
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartSwitch 6G302-06 and is the answer not in the manual?
Questions and answers