Enterasys SmartSwitch 6000 User Manual page 125

Table 4-9 VLAN Redirect Configuration Screen Field Descriptions (Continued)
Use this field...
Destination Module
(Read-Only)
Destination Port
(Read-Only)
Frame Format
(Read-Only)
NOTE: See
Src VLAN ID [n]
(Modifiable)
Src Module [n]
(Selectable)
Dest Port [n]
(Selectable)
Dest Module [n]
(Selectable)
Frame Format
(Selectable)
Redirect Errors
Status
(Toggle)
To...
See which modules are currently set as destination modules.
See which ports are currently set as destination ports. Multiple
VLAN IDs may be assigned to a destination port.
Display the current frame format setting: RECEIVED, TAGGED, or
UNTAGGED. The default is RECEIVED.
•
RECEIVED – Frames are redirected in the format that they were
received by the switch module.
•
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification of the
receiving port.
•
UNTAGGED – Frames are transmitted on the destination port
without a VLAN tag regardless of the format of the received frame.
Section 4.9.1 to change the settings in the following fields.
Enter the VLAN ID of the VLAN that is to be redirected to a port. A
VLAN can not be redirected to more than one port at a time.
Select the module [n] that is to be changed to a source module.
Select the port [n] that is to be changed to a destination port. If a port is
currently being redirected, it will not display as a selectable port.
Select the module [n] that is to be changed to a destination module.
Select the frame format for the transmission of redirected frames on the
destination port. RECEIVED, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is RECEIVED.
Unsupported (only valid frames can be classified into a VLAN).
Add or delete source and destination ports selected in the Source
VLAN [n] and Destination Port [n] fields.
VLAN Redirect Configuration Screen
Chassis Menu Screens 4-25