Enterasys SmartSwitch 6000 User Manual page 355

netstat (Continued)
Example:
-> netstat -i
Interface + DescriptionMTU
#1 (ethernet - csmacd) 1514 10000000 up
#2 (ethernet - csmacd) 1514 10000000 up
#3 (ethernet - csmacd) 1514 10000000 up
#4 (ethernet - csmacd) 1514 10000000 up
-> netstat -r
Destination
# Default Route
# 134.141.0.0
# 134.141.0.0
non_bridge_if_num
Description:
Configures or displays the current interface number assigned to non-bridge
ports. Changing of the interface number assigned to non-bridge ports will lead
to a reset of the board.
Syntax:
non_bridge_if_num [ 0 | 9999 | status ]
Options:
0 | 9999 — Specifies an interface number.
status — Displays the non-bridge interface number.
Example:
-> non_bridge_if_num_status
non bridge interface number is 0.
Speed Admin Oper MAC Addr
Next-hop
DirectConnection 1
DirectConnection 2
DirectConnection 3
up 0x00 0x00 0x1d 0x07 0x50 0x0e
up 0x00 0x00 0x1d 0x07 0x50 0x0f
up 0x00 0x00 0x1d 0x07 0x50 0x10
up 0x00 0x00 0x1d 0x07 0x50 0x11
Interface
Network Tools Screens
Built-in Commands
12-19