Yamaha RCX141 User Manual page 40

2. Installing the robot controller
c
CAUTION
• When attaching the L-type
brackets to the rear of the
controller, provide a clearance of
at least 30mm between the rear
panel and wall or other objects.
• The L-type brackets have
mounting holes in two different
position. Use the holes that best
match the equipment layout.
3
4
3-
3) Attaching the L-type brackets (supplied as standard accessories) to the rear
Fig. 3-2-2-3
4) Attaching the L-type brackets (option) to the side
Fig. 3-2-2-4
L-type bracket part No. (single item)
1 Standard (for front and rear)
2 Option (for side)
When installing the controller with L-type brackets, use two same brackets
for one controller.
KX0-M410H-003
KX0-M410H-102