2 SWITCH INSTALLATION
This chapter explains how to inspect and install your SmartSwitch 9A100 ATM switch module.
2.1
UNPACKING THE SWITCH
Remove the accessory carton from the SmartSwitch 9A100 shipping box. Carefully remove the switch from its
packing material.
2.1.1
Accessory Carton Contents
Open the accessory carton and check that it contains the following items:
— 7-foot UTP cable, terminated on both ends with RJ-45 connectors
— RJ-45 to 9-pin female adapter (labeled PC)
— Console cabling instruction sheet
— CDROM containing the following:
-
SmartSwitch 9A100 operating firmware
-
SmartSwitch ATM switch documentation in Adobe Acrobat format
-
SmartSwitch ATM Administrator software
-
MIB files
-
SmartSwitch 9A100 Release Notes
Note
If any of these items are missing, contact Cabletron Global Support Center
immediately.
SmartSwitch 9A100 Installation and Setup Guide 2-1
Need help?
Do you have a question about the SmartSwitch 9A100 and is the answer not in the manual?
Questions and answers