Installing The Smartswitch 9000 Module; Unpacking The Module - Cabletron Systems SmartSwitch 9000 User Manual

Enterasys smartswitch 9000: user guide

Hide thumbs Also See for SmartSwitch 9000:

Table of Contents

Installing the SmartSwitch 9000

Module

This module uses TPIMs for the front panel RI/RO connections. They are not

shipped with the module and must be purchased separately. There are

conﬁguration switches on some of the TPIMs. They are described in the

instruction card shipped with the TPIMs. For information on the various TPIMs

models, see Appendix A .

1. Carefully remove the module from the shipping box. (Save the box and

packing materials in the event the module must be reshipped.)

2. Remove the module from the plastic bag. Observe all precautions to prevent

damage from Electrostatic Discharge (ESD).

3. Carefully examine the module, checking for damage. If any damage exists,

DO NOT install the module. Contact Cabletron Systems Technical Support

immediately.

Chapter 2

2-1

Table of Contents

Need help?

Do you have a question about the SmartSwitch 9000 and is the answer not in the manual?

Mmac-plus 9t125-08 Smartswitch 9000 9t125-08