ProSoft Technology ControlLogix MVI56E-SMGC User Manual page 54

MVI56E-SMGC ♦ ControlLogix™ Platform
Enhanced FMC722 TPU General Communication Module
If PCB is unable to connect to the module:
1 Click the B
the module, then right-click and choose S
2 Close ProSoft Discovery Service, and click the C
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or switch
(using the grey cable) or directly between your computer and the module (using the
red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.
ProSoft Technology, Inc.
D ( ) button to open the ProSoft Discovery Service. Select
ROWSE EVICE S
Diagnostics and Troubleshooting
PCB.
ELECT FOR
button again.
ONNECT
User Manual
Page 54 of 98