ProSoft Technology inRax MVI71-BDW User Manual
  1. Manuals
  2. Brands
  3. ProSoft Technology Manuals
  4. Control Unit
  5. inRax MVI71-BDW
  6. User manual

ProSoft Technology inRax MVI71-BDW User Manual

Plc platform, bardac communication module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MVI71-BDW
PLC Platform
BARDAC Communication Module
October 12, 2010
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the inRax MVI71-BDW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ProSoft Technology inRax MVI71-BDW

Summary of Contents for ProSoft Technology inRax MVI71-BDW

  • Page 1 MVI71-BDW PLC Platform BARDAC Communication Module October 12, 2010 USER MANUAL...

  • Page 2: Your Feedback Please

    ProSoft Technology Product Documentation In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments. User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided on the enclosed CD-ROM, and are available at no charge from our web site: www.prosoft-technology.com Printed documentation is available for purchase.

  • Page 3: Important Installation Instructions

    Important Installation Instructions Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501-4 (b) of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the Canadian Electrical Code for installations in Canada, and in accordance with the authority having jurisdiction.

  • Page 4: Markings

    Markings Electrical Ratings Backplane Current Load: 800 mA @ 5 Vdc Operating Temperature: 0° C to 60° C (32° F to 140° F) Storage Temperature: -40° C to 85° C (-40° F to 185° F) Shock: 30g Operational; 50g non-operational; Vibration: 5 g from 10 Hz to 150 Hz Relative Humidity 5% to 95% (without condensation) All phase conductor sizes must be at least 1.3 mm(squared) and all earth ground conductors must be at least 4mm(squared).

  • Page 5: Table Of Contents

    LED Status Indicators ....................40 3.1.1 Ethernet LED Indicators ..................42 3.1.2 Clearing a Fault Condition ..................42 3.1.3 Troubleshooting ....................... 43 Using ProSoft Configuration Builder (PCB) for Diagnostics........44 ProSoft Technology, Inc. Page 5 of 98 October 12, 2010...
  • Page 6 Limitation of Remedies ** ..................94 5.2.7 Time Limit for Bringing Suit ..................94 5.2.8 No Other Warranties ....................94 5.2.9 Allocation of Risks ....................94 5.2.10 Controlling Law and Severability ................95 Index Page 6 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 7: Guide To The Mvi71-Bdw User Manual

    Functional Overview Functional Overview (page 60, page 51) Support, Service, and Support, Service This section contains Support, Service and → Warranty and Warranty (page Warranty information. Index Index of chapters. Index ProSoft Technology, Inc. Page 7 of 98 October 12, 2010...

  • Page 8: Guide To The Mvi71-Bdw User Manual

    Guide to the MVI71-BDW User Manual MVI71-BDW ♦ PLC Platform User Manual BARDAC Communication Module Page 8 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 9: Start Here

    Hardware installation and wiring: install the module, and safely connect BARDAC and PLC devices to a power source and to the MVI71-BDW module’s application port(s) ProSoft Technology, Inc. Page 9 of 98 October 12, 2010...

  • Page 10: System Requirements

    256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color 1024 × 768 recommended) CD-ROM drive HyperTerminal or other terminal emulator program capable of file transfers using Ymodem protocol. Page 10 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 11: Package Contents

    Connections to Port 1 and 2 of the Module ProSoft Solutions CD Contains sample programs, utilities and documentation for the MVI71-BDW module. If any of these components are missing, please contact ProSoft Technology Support for replacement parts. ProSoft Technology, Inc. Page 11 of 98...

  • Page 12: Setting Jumpers

    Note: If you are installing the module in a remote rack, you may prefer to leave the Setup pins jumpered. That way, you can update the module’s firmware without requiring physical access to the module. Page 12 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 13: Install The Module In The Rack

    (backplane) of the PLC rack. Turn power ON. Note: If you insert the module improperly, the system may stop working, or may behave unpredictably. ProSoft Technology, Inc. Page 13 of 98 October 12, 2010...

  • Page 14: Connect Your Pc To The Processor

    Connect the right-angle connector end of the cable to your controller at the communications port. Connect the straight connector end of the cable to the serial port on your computer. Page 14 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 15: Download The Sample Program To The Processor

    Click OK to switch the processor from Program mode to Run mode. Note: If you receive an error message during these steps, refer to your RSLogix documentation to interpret and correct the error. ProSoft Technology, Inc. Page 15 of 98 October 12, 2010...

  • Page 16: Configuring The Rslinx Driver For The Pc Com Port

    Note: If the list of configured drivers is blank, you must first choose and configure a driver from the Available Driver Types list. The recommended driver type to choose for serial communication with the processor is RS-232 DF1 Devices. Page 16 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 17 If you are still unable to auto-configure the port, refer to your RSLinx documentation for further troubleshooting steps. ProSoft Technology, Inc. Page 17 of 98 October 12, 2010...

  • Page 18: Connect Your Pc To The Module

    RJ45-DB-9 Serial Adapter Cable and a Null Modem Cable. Attach both cables as shown. Insert the RJ45 cable connector into the Configuration/Debug port of the module. Attach the other end to the serial port on your PC. Page 18 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 19: Installing And Configuring The Module

    The rest of this chapter describes these steps in more detail. The next step in installing and configuring the module is to define whether the block transfer or side-connect interface will be utilized. ProSoft Technology, Inc. Page 19 of 98 October 12, 2010...
  • Page 20 More than one read and/or write file may exist in an application. This is required when more than 1000 words of data are required. Two examples are given below for the files used with different data set sizes: Page 20 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 21: Module Configuration

    MVI71-BDW module. Each step in the setup procedure is defined in order to simplify the use of the module. Set up for the module for both the BTR/BTW and side-connect interfaces is covered. ProSoft Technology, Inc. Page 21 of 98 October 12, 2010...

  • Page 22: Configuration File

    This section contains lists of parameters to be used. Each list begins with the label START and when the END label is reached. When entering the records into the list, make certain that the first character in each line is left blank. Page 22 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 23: Module]

    Read Register Count, so that the Read Data Area does not try to extend above address 4999. Read Data and Write Data Areas must be configured to occupy separate address ranges in module memory and should not be allowed to overlap. ProSoft Technology, Inc. Page 23 of 98 October 12, 2010...
  • Page 24 0, the application port(s) will continue to operate under all conditions. If the value is set larger than 0 (1 to 65535), communications will cease if the specified number of failures occur. Page 24 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 25: Bardac Dw Client 0]

    The value to use depends on the type of communication network used, and the expected response time of the slowest device on the network. ProSoft Technology, Inc. Page 25 of 98 October 12, 2010...

  • Page 26: Bardac Dw Client 0 Commands]

    Each command list record has the same general format. The first part of the record contains the information relating to the communication module and the second part contains information required to interface to the BARDAC DW UDP/IP server device. Page 26 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 27 Enable Code of 2 not be used because a specific command may not be transferred. Therefore, it is strongly suggested to use the Enable Code of 1 to send SET commands. ProSoft Technology, Inc. Page 27 of 98 October 12, 2010...
  • Page 28 When swapping words, make sure you are using an even value in the Count Field. Odd values may generate unexpected results. Node IP xxx.xxx.xxx.xxx The IP address of the device being addressed by the command. Address Page 28 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 29 This parameter specifies the PIN value for the data value or parameter to be considered by the command. Refer to the drive manual for a complete listing of valid PINs for your specific application. ProSoft Technology, Inc. Page 29 of 98 October 12, 2010...

  • Page 30: Module Data

    Page 30 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 31: Status Data

    Refer to the Reference chapter for a complete listing of the data stored in this object. ProSoft Technology, Inc. Page 31 of 98 October 12, 2010...

  • Page 32: User Data

    This data is passed from the processor to the module for status and control information for use in other nodes on the network. Page 32 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 33: Event Command Data

    Event Command Data A user file containing Event Command Data is only required when event commands are utilized in the application. This file holds the information required for an event command. ProSoft Technology, Inc. Page 33 of 98 October 12, 2010...

  • Page 34: Example Of 240 Words Of Read And Write Data (Cfg File=10)

    MVI71-BDW ♦ PLC Platform User Manual BARDAC Communication Module Example of 240 words of read and write data (cfg file=10) Data Files Description N11:0 to 239 Read data N12:0 to 239 Write data Page 34 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 35: Example Of 2300 Read And 3500 Write Data Registers (Cfg File=10)

    If all the configuration parameters are set correctly and the module is attached to a network, the module’s Application LED (APP LED) should remain off and the backplane activity LED (BP ACT) should blink very rapidly. ProSoft Technology, Inc. Page 35 of 98 October 12, 2010...

  • Page 36: Ip Address

    Start Notepad.exe, or any other editor that can save plain text files. Open the file WATTCP.CFG. The following example shows the contents of a typical WATTCP.CFG file. # ProSoft Technology # Default private class 3 address my_ip=192.168.0.100 # Default class 3 network mask netmask=255.255.255.0...

  • Page 37: Uploading And Downloading The Configuration File

    After the file has been successfully downloaded, the module will restart the program and load the new configuration information. Review the new configuration using menu commands [6] and [0] to verify that the module is configured correctly. ProSoft Technology, Inc. Page 37 of 98 October 12, 2010...

  • Page 38: Ladder Logic

    The sample ladder logic, on the ProSoft Solutions CD-ROM, is extensively commented, to provide information on the purpose and function of each rung. For most applications, the sample ladder will work without modification. Page 38 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 39: Diagnostics And Troubleshooting

    Configuration/Debug port, using the troubleshooting and diagnostic capabilities of ProSoft Configuration Builder (PCB). Status data values can be transferred from the module to processor memory and can be monitored there manually or by customer-created logic. ProSoft Technology, Inc. Page 39 of 98 October 12, 2010...

  • Page 40: Led Status Indicators

    24 hours. If BAT LED still does not go off, contact ProSoft Technology, as this is not a user serviceable item. Page 40 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 41 Make sure each parameter is set correctly for the specific application. If the APP, BP ACT and OK LEDs blink at a rate of every one-second, this indicates a serious problem with the module. Call ProSoft Technology support to arrange for repairs. ProSoft Technology, Inc.

  • Page 42: Ethernet Led Indicators

    If the module's OK LED does not turn GREEN, verify that the module is inserted completely into the rack. If this does not cure the problem, contact ProSoft Technology Technical Support. Page 42 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 43: Troubleshooting

    User Manual 3.1.3 Troubleshooting Use the following troubleshooting steps if you encounter problems when the module is powered up. If these steps do not resolve your problem, please contact ProSoft Technology Technical Support. Processor Errors Problem description Steps to take...

  • Page 44: Using Prosoft Configuration Builder (Pcb) For Diagnostics

    Start PCB, and then select the module to test. Click the right mouse button to open a shortcut menu. On the shortcut menu, choose D IAGNOSTICS This action opens the Diagnostics dialog box. Page 44 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 45 On computers with more than one serial port, verify that your communication program is connected to the same port that is connected to the module. If you are still not able to establish a connection, contact ProSoft Technology for assistance.

  • Page 46: Navigation

    (O) and the number zero (0) are not interchangeable. Although these characters look alike on the screen, they perform different actions on the module and may not be used interchangeably. Page 46 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 47: Main Menu

    Only use these commands if you are specifically directed to do so by ProSoft Technology Technical Support staff. Some of these command keys are not listed on the menu, but are active nevertheless. Please be careful when pressing keys so that you do not accidentally execute an unwanted command.
  • Page 48 After the file has been successfully uploaded, you can open and edit the file to change the module’s configuration. Resetting Diagnostic Data Press [U] to reset the status counters for the Client and/or servers in the module. Page 48 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 49 Exiting the Program Press [ESC] to restart the module and force all drivers to be loaded. The module will use the configuration stored in the module's Flash memory to configure the module. ProSoft Technology, Inc. Page 49 of 98 October 12, 2010...

  • Page 50: Database View Menu

    Displaying the Current Page of Registers Again Press [S] from the Database View menu to show the current page of registers again. This screen displays the current page of 100 registers in the database. Page 50 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 51 Press [A] from the Database View menu to display the data on the current page in ASCII format. This is useful for regions of the database that contain ASCII data. Returning to the Main Menu Press [M] to return to the Main menu. ProSoft Technology, Inc. Page 51 of 98 October 12, 2010...

  • Page 52: Master Command Error List Menu

    Press [+] to display data for the next page of commands. Viewing the Next Page of Commands Press [N] to display the next page of commands. Returning to the Main Menu Press [M] to return to the Main menu. Page 52 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 53: Master Command List Menu

    Press [+] to view the next 50 commands from the master command list. Viewing the Next Page of Commands Press [N] to display the next page of commands. Returning to the Main Menu Press [M] to return to the Main menu. ProSoft Technology, Inc. Page 53 of 98 October 12, 2010...

  • Page 54: Network Menu

    Press [Y] to confirm the file transfer, and then follow the instructions on the terminal screen to complete the file transfer process. After the file has been successfully transferred, you can open and edit the file to change the module’s network configuration. Page 54 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 55 Press [V] to view the module’s WATTCP.CFG file. Use this command to confirm the module’s current network settings. Returning to the Main Menu Press [M] to return to the Main menu. ProSoft Technology, Inc. Page 55 of 98 October 12, 2010...

  • Page 56: Reading Status Data From The Module

    Complete display of the module’s internal database (registers 0 to 3999) Version Information Control over the module (warm boot, cold boot, transfer configuration) Facility to upload and download the module’s configuration file Page 56 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 57: Reference

    In This Chapter Product Specifications ................58 Functional Overview ................60 Cable Connections ................77 MVI71-BDW Status Data Definition for Side Connect File ....82 Command Entry Form ................85 ProSoft Technology, Inc. Page 57 of 98 October 12, 2010...

  • Page 58: Product Specifications

    60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration Page 58 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 59: Functional Specifications

    Supports up to 100 user-defined read or write commands that can be sent to a Bardac device Configurable parameters for the client include Error/Status Pointer Command Error Pointer Response Timeout Retry Count ProSoft Technology, Inc. Page 59 of 98 October 12, 2010...

  • Page 60: Functional Overview

    Main Logic Loop Upon completing the power up configuration process, the module enters an infinite loop that performs the functions shown in the following diagram. Page 60 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 61: Block Transfer Backplane Data Transfer

    BTR and BTW blocks. Ladder logic must be written in the PLC processor to interface the block data with user data files. All data used by the module is stored in its internal database. ProSoft Technology, Inc. Page 61 of 98 October 12, 2010...
  • Page 62 1 to 68 Read or Write Data 1000 to 1067 Output Initialization Blocks 2000 Event Command Block 5001 to 5006 Command Control 9998 Warm-Boot Control Block 9999 Cold Boot Control Block Page 62 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 63 This sequence will continue until interrupted by other write block numbers sent by the controller or by a command request from a node on the Modbus network or operator control through the module’s Configuration/Debug port. ProSoft Technology, Inc. Page 63 of 98 October 12, 2010...
  • Page 64 The format of the returned write block is shown in the following table. Offset Description Length 1000 to 1067 1 to 60 Output Data 61 to 63 Spare Page 64 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 65 4 clients in the module is to handle the message. Values from 0 to 3 are acceptable for this parameter. When the module receives the block, it will process it and place it in the command queue. ProSoft Technology, Inc. Page 65 of 98 October 12, 2010...
  • Page 66 Word two of the block can be used by the ladder logic to determine if the command was added to the command queue of the module. The command will only fail if the command queue for the port is full (100 commands for each queue). Page 66 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 67 0 to 99 and correspond to the module's command list entries. The module responds to a command control block with a block containing the number of commands added to the command queue for the port. ProSoft Technology, Inc. Page 67 of 98 October 12, 2010...
  • Page 68 The following table describes the format of the control block. Offset Description Length 9999 1 to 63 Spare Page 68 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 69: Side-Connect Backplane Data Transfer (Requires Special User-Supplied Side- Connect Adapter)

    Data transferred from the processor to the module Cfg File+1+n+m Other files for write data The number of read and write files are dependent on the modules configuration. Two examples follow: ProSoft Technology, Inc. Page 69 of 98 October 12, 2010...
  • Page 70 (offset 50 to 113). The format of these control commands is similar to that described in the preceding section. The following section describes the use of command control when the side-connect interface is used Page 70 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 71 Word two of the block can be used by the ladder logic to determine if the command was added to the command queue of the module. The command will only fail if the command queue for the port is full (100 commands for each queue). ProSoft Technology, Inc. Page 71 of 98 October 12, 2010...
  • Page 72 The following table describes the format for this block. Offset Description Length 5001 to 5006 Write Block ID Number of commands added to command queue Page 72 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 73: Data Flow Between Mvi71-Bdw Module And Plc Processor

    The following topics describe the flow of data between the two pieces of hardware (PLC processor and MVI71-BDW module) and other nodes on the UDP/IP network under the module’s different operating modes. ProSoft Technology, Inc. Page 73 of 98 October 12, 2010...
  • Page 74 Status data is returned to the PLC processor for the client and a Command List error table can be established in the module's internal database. Page 74 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 75 Device not ready (initializing) 0xFFFE Device lock timeout (serious problem with device) 0xFFFF Unable to obtain device lock (device servicing other transaction) Others Refer to drive manual or contact Bardac. ProSoft Technology, Inc. Page 75 of 98 October 12, 2010...
  • Page 76 Buffer for UDP socket could not be allocated 0xFFDC Command response timeout Command List Entry Errors Code Description Too few parameters for command Invalid type code Invalid internal database address Invalid function code Invalid swap code Page 76 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 77: Cable Connections

    ASCII terminal program (like Windows HyperTerminal) by selecting [@] (Network Menu) and [V] (View) options when connected to the Debug port. For more information on serial port access, see the chapter on Diagnostics and Troubleshooting (page 39). ProSoft Technology, Inc. Page 77 of 98 October 12, 2010...

  • Page 78: Rs-232 Configuration/Debug Port

    This port permits a PC based terminal emulation program to view configuration and status data in the module and to control the module. The cable for communications on this port is shown in the following diagram: Page 78 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 79 To stop the driver your RSWho screen should look like this: Branches are displayed or hidden by clicking on the or the icons. When you have verified that the driver is not being browsed, go to >C OMMUNICATIONS ONFIGURE RIVERS ProSoft Technology, Inc. Page 79 of 98 October 12, 2010...
  • Page 80 (usually only on Windows NT machines). If you have followed all of the above steps, and it will not stop the driver, then make sure you do not have RSLogix open. If RSLogix is not open, and you still cannot stop the driver, then reboot your PC. Page 80 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 81: Db9 To Rj45 Adaptor (Cable 14)

    MVI71-BDW ♦ PLC Platform Reference BARDAC Communication Module User Manual 4.3.3 DB9 to RJ45 Adaptor (Cable 14) ProSoft Technology, Inc. Page 81 of 98 October 12, 2010...

  • Page 82: Mvi71-Bdw Status Data Definition For Side Connect File

    Command Block Count This field contains the total number of command blocks received from the processor. Error Block Count This field contains the total number of block errors recognized by the module. Page 82 of 98 ProSoft Technology, Inc. October 12, 2010...
  • Page 83 Client Current Error This value corresponds to the current error code for the Code client. Client Last Error Code This value corresponds to the last error code recorded for the client. ProSoft Technology, Inc. Page 83 of 98 October 12, 2010...
  • Page 84 Client Current Error This value corresponds to the current error code for the Code client. Client Last Error Code This value corresponds to the last error code recorded for the client. Page 84 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 85: Command Entry Form

    The form below can be used to design the application's command list: Module Information Device Information Column Enable Internal Poll Count Swap Serv Slave Function Device Code Address Interval Code Address Port Node Code Modbus Time Address ProSoft Technology, Inc. Page 85 of 98 October 12, 2010...
  • Page 86 Reference MVI71-BDW ♦ PLC Platform User Manual BARDAC Communication Module Page 86 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 87: Support, Service & Warranty

    Return Material Authorization (RMA) Policies and Conditions ....89 LIMITED WARRANTY ................91 Contacting Technical Support ProSoft Technology, Inc. (ProSoft) is committed to providing the most efficient and effective support possible. Before calling, please gather the following information to assist in expediting this process:...
  • Page 88 Languages spoken include: Spanish, English Tel: +52-222-3-99-6565, Latin America (location in Puebla, Mexico) E-mail: soporte@prosoft-technology.com Languages spoken include: Spanish Tel: +55-11-5083-3776, Brasil (location in Sao Paulo) E-mail: brasil@prosoft-technology.com Languages spoken include: Portuguese, English Page 88 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 89: Return Material Authorization (Rma) Policies And Conditions

    The following Return Material Authorization (RMA) Policies and Conditions (collectively, "RMA Policies") apply to any returned product. These RMA Policies are subject to change by ProSoft Technology, Inc., without notice. For warranty information, see Limited Warranty (page 91). In the event of any inconsistency between the RMA Policies and the Warranty, the Warranty shall govern.

  • Page 90: Returning Units Under Warranty

    Return Material Authorization i. If a defect is found and is determined to be customer generated, or if the defect is otherwise not covered by ProSoft Technology s warranty, there will be no credit given. Customer will be contacted and can request module be returned at their expense;...

  • Page 91: Limited Warranty

    This Limited Warranty ("Warranty") governs all sales of hardware, software, and other products (collectively, "Product") manufactured and/or offered for sale by ProSoft Technology, Incorporated (ProSoft), and all related services provided by ProSoft, including maintenance, repair, warranty exchange, and service programs (collectively, "Services"). By purchasing or using the Product or Services, the individual or entity purchasing or using the Product or Services ("Customer") agrees to all of the terms and provisions (collectively, the "Terms")

  • Page 92: What Is Not Covered By This Warranty

    (collectively, "high risk activities"). ProSoft specifically disclaims any express or implied warranty of fitness for high risk activities. Page 92 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 93: Intellectual Property Indemnity

    The Warranty set forth in What Is Covered By This Warranty (page 91) are in lieu of all other warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. ProSoft Technology, Inc. Page 93 of 98 October 12, 2010...

  • Page 94: Limitation Of Remedies

    Customer. This allocation is recognized by both parties and is reflected in the price of the goods. The Customer acknowledges that it has read this Warranty, understands it, and is bound by its Terms. Page 94 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 95: Controlling Law And Severability

    Warranty shall remain in full force and effect. Any cause of action with respect to the Product or Services must be instituted in a court of competent jurisdiction in the State of California. ProSoft Technology, Inc. Page 95 of 98 October 12, 2010...
  • Page 96 Support, Service & Warranty MVI71-BDW ♦ PLC Platform User Manual BARDAC Communication Module Page 96 of 98 ProSoft Technology, Inc. October 12, 2010...

  • Page 97: Index

    Minimum Command Delay • 25 Disclaimer Regarding High Risk Activities • 92 Module Configuration • 21 Displaying the Current Page of Registers Again • 50 Module Data • 30, 82 ProSoft Technology, Inc. Page 97 of 98 October 12, 2010...

  • Page 98: Prosoft Technology, Inc

    Viewing Data in Decimal Format • 7, 51 Product Specifications • 7, 58 Viewing Data in Floating-Point Format • 51 ProSoft Technology® Product Documentation • 2 Viewing Data in Hexadecimal Format • 51 Viewing Module Configuration • 47 Viewing Register Pages • 50 Viewing the Next 50 Commands •...

Table of Contents