Installing The Scsi Driver For Windows Nt - Adaptec 29320A-R Manual

Installing the SCSI Driver
for Windows NT 4.0
In this Chapter...
Installing the Driver When Installing Windows NT
Installing the Driver When Windows NT 4.0 Already Installed 9-4
Using Advanced Configuration Parameters
Hot-Plug PCI Support
Using Windows NT 4.0 and the Host Adapter
Troubleshooting
This chapter explains how to install the Adaptec Ultra320 SCSI
driver
adpu320.sys
Ultra320 SCSI driver for Windows 2000/2003/XP, see
Installing the SCSI Driver For Windows 2000/2003 and
If you are performing a first time Windows NT 4.0 installation, see
Installing the Driver When Installing Windows NT on page
Windows NT 4.0 is already installed in your system, see
the Driver When Windows NT 4.0 Already Installed on page
for Windows NT 4.0. To install the Adaptec
9
9-2
9-5
9-5
9-6
9-9
Chapter 8,
XP.
9-2. If
Installing
9-4.
9-1