Configuring Internet Browsers On Windows - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide
9 When you see the
The Setup Status window shows progress using a scroll bar.
Before the scroll bar shows the installation is completed,
another window pops up indicating that a security certificate
has been generated.
10 Click OK.
The Root Certificate Store window appears.
11 Click Yes.
The security certificate generated during installation is added to
the Certificate Store. If you click No at this point, you will need
to install the certificate the first time you run Adaptec Storage
Manager.
12 When prompted to restart your computer, accept the default
(Yes) and click Finish.
13 The system restarts to complete the installation.
14 Remove the HostRAID Installation CD before the system
restarts; otherwise, the installation will start again.

Configuring Internet Browsers on Windows

If you are managing a local storage array and your computer uses a
proxy server, you need to configure your browser to enable
Adaptec Storage Manager to bypass the proxy server. Also, if you
are managing remote systems, you need to configure Adaptec
Storage Manager to bypass the proxy server when communicating
with these systems.
The following procedures are described in this section:
Configuring Internet Explorer for Local Management on page 14-5
Configuring Internet Explorer for Remote Management on page 14-6
Configuring Netscape Navigator for Local Management on
page 14-6
Configuring Netscape Navigator for Remote Management on
page 14-6
14-4
Setup Information
, click Next.