Adaptec 29320A-R Manual page 120

Installing the SCSI Driver for Novell NetWare
[xxxxx085] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx087] Internal driver error
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx088] Adapter software initialization failure
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx096] Adapter hardware initialization failure - possible resource conflict
The driver has attempted to initialize the adapter hardware but
failed. This might suggest that the adapter resources (for example,
IRQ) conflict with the resources of another board installed in your
system.
[xxxxx099] Adapter software initialization failure
[xxxxx09a] Adapter software initialization failure
[xxxxx09b] Adapter software initialization failure
An error has occurred initializing one of the driver's internal data
structures for a device connected to the adapter. This may result in
problems accessing the device. Try installing the most up-to-date
version of the driver available from the Adaptec Web site.
[xxxxx0ab] Driver already loaded for this host bus adapter
The driver is already loaded for this adapter. Verify that the correct
adapter is specified in your command line or startup file.
10-11