Using Scsiselect Utility Menus; Starting The Scsiselect Utility; Using The Scsiselect Utility - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide
HostRAID supports the following RAID levels:
RAID 0—Striping mode for boosting performance.
RAID 1—Mirroring mode for data security.
RAID 10—Mirrored striping for performance and data
protection.
For more information on supported RAID levels, see
RAID on page 1-10.

Using the SCSISelect Utility

Using SCSISelect Utility Menus

To select a SCSISelect menu option, move the cursor to the option
with the arrow keys (
an option displays another menu. You can return to the previous
menu at any time by pressing Esc.

Starting the SCSISelect Utility

To start the SCSISelect, follow these steps:
1 Turn on or restart your computer.
During the startup process, pay careful attention to the
messages that appear on your screen.
2 When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSI Select (TM) Utility!
3 From the device menu that appears, select a channel and press
Enter.
Adaptec
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * =default)
4-2
), then press Enter. In some cases, selecting
SCSISelect(TM)
39320A A at slot 6, 00:0E:00
*
39320A B at slot 6, 00:0E:01
Defining
Utility vX.XX.