Installing A New Host Adapter When Windows 2000/2003 Is Already Installed; Installing A New Host Adapter When Windows Xp Is Already Installed - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide
Installing a New Host Adapter When Windows
2000/2003 Is Already Installed
To install a new host adapter after Windows 2000 or Windows
Server 2003 is already installed:
1 Make sure your system is shut down and the power is off.
2 Install the new host adapter.
3 Start Windows. When the hardware wizard detects the card,
click Yes to continue the installation.
4 Insert the Windows driver disk you created into the floppy disk
drive and click OK.
5 The path will be displayed in the Copy Files from: box. Click
OK. The driver is now installed.
Installing a New Host Adapter When
Windows XP is Already Installed
To install a new host adapter if Windows XP is already installed:
1 Create a Windows driver disk. See
Floppy Disks.
2 Start Windows XP.
Windows XP will automatically discover the new hardware and
load the built-in driver. Let Windows XP complete the hardware
detection and manually update the Adaptec Ultra320 driver
afterward.
3 Select the option, Install from a list or specific location
(Advanced), then select Next.
4 Select the option, Don't search, I will choose the driver to
install, then click Next.
5 Click Have Disk button.
6 Insert the Windows driver disk you created into drive A. The
path will be displayed in the Copy manufacturer's files from
box. Click OK, then click Next:
7 Follow the on-screen prompts to complete the installation.
8-6
Appendix D, Creating Driver