Boot Device Configuration Options - Bbs Systems Only; Boot Device Configuration - Non-Bbs Systems Only - Adaptec 29320A-R Manual

Boot Device Configuration Options – BBS Systems Only
Select Master SCSI Controller—Enables you to select the
master SCSI controller. The master SCSI card does not
necessarily have to be the same as the boot SCSI controller.
Boot SCSI Controller—Enables you to select which SCSI
controller is the boot SCSI controller. The boot SCSI controller
does not necessarily have to be the same as the master SCSI
controller.
Boot Device Configuration – Non-BBS Systems Only
Select Master SCSI Controller—(Default: A First) Enables you
to select the master SCSI controller. The master SCSI card does
not necessarily have to be the same as the boot SCSI controller.
If you change this setting, the change automatically applies to
both SCSI channels.
Boot SCSI Controller—Enables you to select which SCSI
controller is the boot SCSI controller. The boot SCSI controller
does not necessarily have to be the same as the master SCSI
controller. If you change this setting, the change automatically
applies to both SCSI channels.
Boot SCSI ID—(Default: 0) Specifies the SCSI ID of your boot
device. We recommend that you do not change the default
setting. If you change this setting, the change automatically
applies to both SCSI channels.
Boot LUN Number—(Default: 0) Specifies which LUN (Logical
Unit Number) to boot from on your boot device. This setting is
not valid unless Multiple LUN Support is enabled (see
Configuration Options on page
the change automatically applies to both SCSI channels.
Configuring the Adaptec SCSI Card with SCSISelect
3-8). If you change this setting,
Advanced
3-5