Installing The Adaptec Ultra320 Scsi Driver; Migrating With Windows 2000 - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide

Migrating With Windows 2000

Installing the Adaptec Ultra320 SCSI Driver

To migrate the boot channel on HostRAID to Adaptec Ultra320
SCSI with a Windows 2000 operating system, follow these steps:
1 Start Windows 2000.
2 Go to the Device Manager by clicking on Start=>Settings=>
Control Panel=>System=>Hardware=>Device Manager
3 At the Device Manager, click the + sign next to the SCSI and
RAID controllers entry to expand it.
4 There will be two entries representing the dual channels.
Right-click on the channel that you are booting from, then select
Properties.
Note: If you are not sure which channel your boot drive is
connected to, change the view of the Device Manager to
View Devices by connection, and find out which drives are
connecting to which channels.
5 Select Driver, then Update driver.
6 Click Next.
7 Select Display a list of the known drivers for this device so
that I can choose a specific driver, then click Next.
8 Click the Have Disk button.
9 Insert the Adaptec Installation CD into the CD-ROM drive and
click Browse. If the CD automatically opens a welcome screen,
click the Exit button to close it.
10 Click on the path
CD-ROM drive letter).
11 Click on adpu320, then click Open.
12 Click OK.
13 Scroll down the list and select your Adaptec Ultra320 SCSI
driver, then click Next.
F-2
D:\drivers\windows\win32bit
(where : is the
D