Creating Raid 0 Arrays - Adaptec 29320A-R Manual

5 From the Select RAID Member menu, press the Spacebar to
select the hard drives you want to use in the array. An X will
appear next to the drives you have selected.
RAID-1 : Select RAID members
ID Vendor
00 Quantum
01 Quantum
02 Quantum
03 Quantum
<Arrow> move cursor, <Enter> accept option, <Esc> exit

Creating RAID 0 Arrays

To create a RAID 0 array:
1 From the Select RAID Type window, select RAID-0 and press
Enter.
Create RAID
ID
02
03
<Arrow> move cursor, <Enter> accept option, <Esc> exit
2 Select the hard drives you want to use and press Enter.
3 Select the stripe size and press Enter. You can select from 16K,
32K, or 64K (default). If a partition exists on any of the selected
drives, you will get a message that the partition will be deleted.
Using the SCSISelect Utility to Manage Arrays
Adaptec SCSISelect(TM)
39320A at slot 03, 00:0F:00
Product
XP32275W
XP32275W
XP32275W
XP32275W
<Space> select drive on SPARE
Adaptec SCSISelect(TM)
39320A at slot 03, 00:0F:00
Vendor
Quantum
Quantum
Select RAID Type
RAID-0 (High Performance, No Fault Tolerance)
RAID-1 (Fault Tolerance)
RAID-10 (Fault Tolerance, High Performance)
Striping Requirements
Min 2 drives, Max 4 drives
Utility vX.XX
Size
2GB
2GB
2GB
2GB
Utility vX.XX
Product Size
XP34550W 2GB
XP32070W 2GB
X
X
4-7