Adaptec 29320A-R Manual page 74

Adaptec Ultra320 SCSI Cards User's Guide
3 You will get a message asking if you want to automatically fix
errors. Press Yes to AutoFix. This will execute a comparison of
mirrored drives, a copy from the primary drive to secondary
drive when miscompare occurs, and a report at the end of the
verification process.
If you select No, Verify will execute a comparison of mirrored
drives, a log of errors, and a report at the end of the verification
process.
Note: To fix errors found (if any), run Verify again with
Autofix=Yes.
After you select your verification option, the following message
appears:
Depending on your disk capacity, verifying may take several
minutes to several hours. Are you sure?
4 When your Verify is completed, you will get a verification
message and log. Press Esc to exit.
If your Verify is unsuccessful, you will get the following
message:
WARNING: Failed !!!
5 Press Enter and you will return to the Main menu.
4-14