Loading The Driver At Server Bootup - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide

Loading the Driver at Server Bootup

To automatically load the
file (usually located in your server's startup directory)
startup.ncf
must contain a load command line that specifies the location of the
driver and any appropriate command line options (see
Load Command Line Options on page
information on the
documentation.
The correct syntax to load the driver is:
load [pathname]adpu320.ham [options]
For example, the command line to load the driver from the
directory, with the
c:\nwserver
load c:\nwserver\adpu320 verbose=y
Command line options are not case sensitive. Placing commas
between command line options is optional. See
Command Line Options on page 10-5
To modify the
startup.ncf
Enter.
Note: You can also use your DOS text editor to modify the
startup.ncf
10-4
adpu320.ham
file, refer to your NetWare
startup.ncf
verbose=
file, type load nwconfig and press
file.
at server bootup, the
10-5). For additional
option on is:
Using the Load
for possible values.
Using the