Troubleshooting; Error Messages - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide

Troubleshooting

Error Messages

The error messages listed below are the messages associated with
the
adpu320.ham
to the last three digits of the error code. For example, [xxxxx080],
[xxxxx081], [xxxxx082], and so on.
Note: When reporting problems to Customer Support, be sure
to include the complete error code in your problem
description.
[xxxxx080] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx081] Adapter software initialization failure
An error has occurred while the driver was setting up its internal
data structures. Verify that your adapter is supported by this
version of the driver.
[xxxxx082] Internal driver error
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx083] Adapter not supported by this version of the driver
Your adapter is not supported by the driver on your system. You
may have installed a new adapter and have not updated the driver
on your system.
[xxxxx084] Adapter software initialization failure
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
10-10
driver. Messages are listed sequentially according