Adaptec Ultra320 SCSI Cards User's Guide
Installing the Driver When Windows XP is Already Installed
To update or install the a320raid.sys driver if Windows XP is
already installed:
1 Create a Windows driver disk. See
Floppy Disks
2 Start Windows XP.
Windows XP will automatically discover the new hardware and
start the Found New Hardware Wizard to guide you through
the device driver installation.
3 At the Welcome to the Found New Hardware Wizard window,
select Install from a list or specific location (Advanced), then
click Next.
4 Select search removable media (floppy, CD-ROM...), then
insert the Windows driver disk you created into your floppy
disk drive and click Next.
5 Select Adaptec HostRAID U320 Driver for Windows 2000/XP
at the location a:\win32\a320raid.inf from the list, then click
the Next button.
6 Click the Next button again to confirm the installation of the
driver. You may be prompted with this warning message:
"The software you are installing has not passed Windows Logo
testing to verify its compatibility with Windows XP."
Click Continue Anyway to continue the installation.
7 When the driver is copied on the hard drive, click Finish.
8 You will be prompted to restart the computer. Select Yes.
5-4
for more information.
Appendix D, Creating Driver