Deleting Arrays; Adding A Spare Drive - Adaptec 29320A-R Manual

To add a spare to an existing RAID 10 array, see
Drive on page

Deleting Arrays

To delete an array:
1 From the Main menu, select the array you need to delete by
moving the cursor, then press Enter.
2 Press D. The following message appears:
Delete Array?
3 For RAID 0 and RAID 10, go to Step 4. For RAID 1, select one of
these options, then continue to Step 4:
Drive ID 1—deletes out all data on the drive 1
Drive ID 2—deletes out all data on the drive 2
Drive ID 1 & 2—deletes all data on both drives
None—breaks the array but keeps any existing data on both
drives
4 Select Yes and press Enter. The following message appears:
Are you sure?
5 Select Yes and press Enter. If you select No, you will return to
the Main menu.

Adding a Spare Drive

With RAID 1 or RAID 10 you have the option to create a maximum
of 2 spare drives. You can create a spare before you define your
RAID or you can add a spare later to an existing RAID 1 or
RAID 10 array.
To create a spare prior to defining a RAID, or add to an existing
RAID 1 or RAID 10 array:
1 From the Main menu, press S to add a spare. The following
options appear:
Add Spare
Delete Spare
4-11.
(only available if a spare already exists)
Using the SCSISelect Utility to Manage Arrays
Adding a Spare
4-11