Installing the HostRAID
Driver for Windows 2000,
2003, and XP
In this Chapter...
Installing the Device Driver for Windows
Windows 2000/2003/XP Installation and Configuration Notes 5-5
This chapter explains how to install the Adaptec HostRAID
software driver (a320raid.sys) for Windows 2000, Windows Server
2003, and Windows XP. Before installing the driver, make sure you
have completed the following:
Installed the HostRAID card in your system. (See the SCSI
controller hardware documentation for more information.)
If you want to start from the RAID, create the RAID using the
SCSISelect utility. To access SCSISelect, press Ctrl-A at bootup
when the Adaptec BIOS banner comes up. See
the SCSISelect Utility to Manage Arrays
Chapter 4, Using
for more information.
5
5-2
5-1