Using Scsi Disk Utilities; Listing Scsi Ids And Luns - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide
If you select Advanced Configuration Options, the Advanced
Configuration Options menu appears. To change a setting in the
Advanced Configuration Options menu, select the setting.
From the pop-up menu that appears, select a new setting.
Reset SCSI Bus at IC Initialization......................................................
Display <Ctrl><A> Message During BIOS Initialization........................
Extended Int 13 Translation for DOS Drives >1 GByte.........................
POST Display Mode..........................................................................
SCSI Controller Int 13 Support..........................................................
Options Listed Below Have NO EFFECT if Int 13 Support is Disabled
Domain Validation............................................................................
Support Removable Disks Under Int 13 as Fixed Disks .......................
BIOS Support for Bootable CD-ROM .................................................
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * = default)
5 When you are finished changing settings, press Esc until a
message prompts you to save the changes. To save the changes,
select Yes. To abandon the changes, select No.
6 Press Esc until prompted to exit the utility. Then, select Yes.
The computer prompts you if a restart is needed for your new
settings to take effect. (Changing the Master SCSI Controller
setting or running the standalone SCSI utility forces an
automatic restart.) Otherwise, your new settings take effect
immediately.

Using SCSI Disk Utilities

The disk utilities provide options for:

Listing SCSI IDs and LUNs

Verifying or Formatting a disk
Listing SCSI IDs and LUNs
With SCSISelect, you can list the SCSI IDs of devices attached to the
SCSI card. This enables you to quickly verify that no devices on the
SCSI bus have duplicate IDs.
3-16
Adaptec SCSISelect(TM)
Advanced Configuration Options
<F6> - Reset to Host Adapter Defaults
Utility vX.XX
11
Enabled Enabled
7
Enabled
Enabled
Enabled
Enabled
Verbose
Enabled
Press <Enter>
Press <Enter>
Enabled
Disabled
Enabled