The Configuration menu appears. The Configuration menu
displays the current settings for the SCSI bus interface. The BIOS
Information section at the bottom of the menu displays the
Interrupt (IRQ) Channel and I/O Port Address of the selected
device. This section cannot be modified.
Note: Text displayed in yellow is for information only and
cannot be selected.
Adaptec
Configuration
SCSI Bus Interface Definitions
SCSI Controller ID ........................................ 7........
SCSI Controller Parity ....................................Enabled
SCSI Controller Termination ...........................Automatic
Additional Options
Boot Device Configuration.............................. Press <Enter>
SCSI Device Configuration .............................Press <Enter>
Advanced Configuration Options .....................Press <Enter>
HostRAID.......................................................Disabled
BIOS Information
Interrupt (IRQ) Channel.................................10
I/O Port Address............................................FC00h, F000h
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * =default)
From the Configuration menu, you can access the following
settings:
Boot Device Configuration
SCSI Device Configuration
Advanced Configuration Options
Configuring the Adaptec SCSI Card with SCSISelect
SCSISelect(TM)
39320A at slot 6, 00:0E:00
<F6> - Reset to SCSI Controller Defaults
Utility vX.XX
3-13