Rebuilding Arrays - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide
2 Select a drive and press Enter. Select Yes when the following
message appears:
Are you Sure?
Yes/No
After you select your spare drive, it will appear as a spare in the
Main menu.
Create, Spare, Delete, Rebuild, Verify, Bootable
ID Type
00 Mirrored (R1)
03 Hard Drive
03 Spare
03 Hard Drive
V<Arrow> move cursor, <Enter> accept option, <Esc> exit

Rebuilding Arrays

Note: Rebuilding applies to Fault Tolerant arrays (RAID 1 and
RAID 10) only.
If an array Build process (or initialization) is interrupted or critical
with one member missing, you must perform a Rebuild to get the
array to Optimal status. For a critical array Rebuild operation, the
optimal drive is the source drive.
Note: If no spare exists and a hard disk drive fails, you need to
create a spare before you can rebuild an array. See
Spare Drive on page 4-11
To rebuild an array for RAID 1 or RAID 10:
1 From the Main menu, select array for Rebuild and press Enter.
2 Press R for Rebuild.
4-12
Adaptec SCSISelect(TM)
39320A at slot 03, 00:0F:00
Vendor
Adaptec
Quantum
Quantum
Quantum
before continuing your Rebuild.
Utility vX.XX
Product Size
HostRAID-A 2GB
XP3227W 2GB
XP3227W 2GB
XP3227W 2GB
Status
Optimal
Free
Optimal
Free
Adding a