Adaptec Ultra320 SCSI Cards User's Guide
Adaptec SCSI Card 39320A
To manually terminate Channel A, place a shunt on jumper J5. To
manually terminate Channel B, place a shunt on jumper J6. The
following figure shows where the jumpers are located on the
Adaptec SCSI card 39320A.
J6
J5
Adaptec SCSI Card 29320A
To manually terminate the Ultra320 Channel, place a shunt on
jumper J7. To manually terminate the SE Channel, place a shunt on
jumper J5. The following figure shows where the jumpers are
located on the Adaptec SCSI card 29320A.
J5
J7
2-8