Removing The Driver From Solaris 9; Command Line Options - Adaptec 29320A-R Manual

Removing the Driver From Solaris 9

If you no longer need the driver, you can use the following
procedure to remove it:
1 Make sure your Adaptec Ultra320 controller is not the boot
controller and login as root or become super user.
2 Remove the driver by typing:
#pkgrm ADPU320 (use uppercase ADPU320)
3 Follow the on-screen instructions for removing the driver.
4 Create
/reconfigure
#touch /reconfigure
This will cause the operating system to check for removed
devices on next system boot.
5 Restart the system by typing:
#shutdown -i0 -g30 -y
The shutdown options are:
'-i0' to bring system to 0 init state.
'-g60' to shut the system down in 60 seconds.
'-y' continue to shutdown without user intervention.

Command Line Options

To display system information such as device configurations,
type:
#prtconf or #sysdef
To displays system diagnostic messages, type:
#dmesg
To check driver version, type:
#pkginfo
Installing the SCSI Driver for Sun Solaris
file by typing:
12-5