Installing The Driver When Windows Nt Is Already Installed; Updating Windows - Adaptec P2280A Manual

Ultra160 Family Manager Set User's Guide
Installing the Driver When Windows NT is
Already Installed
To update or install the adpu160m.sys driver if Windows NT is
already installed, follow the instructions below for the version of
Windows NT you are installing.
Updating Windows NT 4.0
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, and then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Ultra160 Family Manager Set disk for Windows into
drive A.
8
From the Copy Manufacturer's File From text box, type a:\nt4,
and click OK.
9
In the Install Driver window, Click OK.
10
Click the New button when asked if you want to use the
currently installed driver(s) or install new one(s).
11
Type a:\nt4 again, and click Continue. The driver is now
installed.
12
You must restart your computer for the changes to take effect.
Click Yes to restart your computer. Click No to return to the
SCSI Adapters window.
2-4