Installing The Driver When Installing Netware; Netware 5.1 And 6.X - Adaptec 29320A-R Manual

Adaptec Ultra320 SCSI Cards User's Guide

Installing the Driver When Installing NetWare

To install the
adpu320.ham
the instructions below for the version of NetWare you are
installing.

NetWare 5.1 and 6.x

Follow these instructions only if you are installing NetWare 5.1 and
6.x for the first time:
1 Begin installation of NetWare 5.0/6.x on your server as
instructed in your NetWare documentation.
2 When a screen appears that asks you to add device drivers,
select Modify and press Enter.
3 Select Storage adapters and press Enter.
4 Press Insert to add storage drivers.
5 Press Insert to add an unlisted driver.
6 Insert the Ultra320 FMS driver floppy disk for NetWare into
your floppy disk drive.
7 Press F3 and type a:\netware\v51_v6x as the path to the
adpu320.ham
8 Select adpu320.ham and press Enter.
9 Select Return to driver list and press Enter.
10 To install additional adapters, follow the procedures from
Step 4.
11 When you are finished, select Continue to complete the
installation.
10-2
driver when you install NetWare, follow
driver for NetWare.