Installing The Host Adapter And Scsi Devices - Adaptec AHA-3940U User Manual

Installing the Host Adapter
and SCSI Devices
This chapter explains how to physically install an AHA-3940U/
3940UW/3940UWD host adapter in your computer and connect
SCSI devices to it.
You may need to run your computer's Setup program as part of the
installation process. See Running the Computer's Setup Program on
page 2-17 for more information.
After the host adapter is physically installed, you can change its con-
figuration with the SCSISelect utility, as described in Chapter 3, Con-
figuring Your Host Adapter.
You can install multiple AHA-3940U/3940UW/3940UWD host
adapters in your computer if enough PCI bus slots are available.
Each AHA-3940U/3940UW/3940UWD host adapter has two sepa-
rate SCSI channels. If you install multiple AHA-3940U/3940UW/
3940UWD host adapters in your computer, you can enable the
onboard BIOS on just one host adapter or on more than one of the
host adapters.
AHA-3940U/3940UW/3940UWD User's Guide
Stock Number: 511041-00, Rev. B
Print Spec Number: 494569-00
Current Date: 2/14/97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2
2-1
Page: 2-1
ECN Date: 2/17/97