2740w-ig.doc Black 8
AHA-2740W/2742W/2744W
Installing the Host Adapter
Always refer to your system's documentation for instruc-
tions on removing the system cover and adding option
boards.
CAUTION:
Turn OFF and disconnect power to the system
and external equipment.
To install the AHA-2740W/2742W/2744W in your EISA
computer system, complete the following:
1
Remove the cover of your EISA personal computer
to expose the EISA bus slots on the motherboard.
2
Locate an unused EISA slot in your system which
supports bus master operations (refer to the host
system documentation for details) and remove the
corresponding slot cover.
3
Align and insert the host adapter in the EISA slot.
4
Secure the host adapter in your system.
Note:
EISA boards require firmer seating than typical ISA
expansion boards. Make sure the host adapter is fully
seated in its slot.
8