Table of Contents
Advertisement
ASA-7211C/F Installation Guide
Installing the Windows Driver
This section contains the following procedures:
Installing the Driver in Windows Server 2003
I
Installing the Driver in Windows 2000
I
Installing the Driver in Windows NT 4.0
I
Installing the Driver in Windows Server 2003
To install the driver:
1
Install the Adaptec iSCSI adapter according to the instructions
in
Chapter
2.
Start Windows and log in with administrative privileges.
2
The Windows Found New Hardware Wizard automatically
detects the new hardware.
The adapter is identified as a
will be listed under the
in the Device Manager.
3
Select Install from a list or specific location (Advanced).
4
Insert the Adaptec installation CD and then click Next.
Select Search for the best driver in these locations and select
5
Include this location in the search. Deselect Search removable
media.
Click Browse and locate the
6
7
Click Open and then click OK.
If a warning message states that the software
8
Windows Logo testing
On the Completing the Found New Hardware Wizard window,
9
click Finish.
When the driver installation is finished, the Found New
Hardware Wizard window is displayed a second time,
requesting that you install the Adaptec ASAMGMT Processor
Device.
10 Select Install from a list or specific location (Advanced) and
click Next.
3-2
Mass Storage Controller
SCSI and RAID Controllers
Win2003
, click Continue Anyway.
. Later, it
device group
driver folder on the CD.
...has not passed
Advertisement
Table of Contents
