Installing The Driver When Windows Nt Is Already Installed - Adaptec AAA-UDMA Install Manual

AAA-UDMA Installation and Hardware Guide

Installing the Driver When Windows NT is Already Installed

To update or install the cdaudma.sys driver if Windows NT is
already installed, follow these steps:
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, and then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Adaptec Array1000UDMA Family Manager Set
driver disk in your floppy disk drive and press Enter. Enter
the following path to the installation files and then click OK.
a:\
The Adaptec Array1000UDMA Family Adapter driver is high-
lighted by default.
8
In the Install Driver window, Click OK.
9
You must restart your computer for the changes to take effect.
Click Yes to restart your computer.
10
When driver installation is complete, install Adaptec CI/O
Management Software. Refer to the Adaptec CI/O Management
Software User's Guide for instructions on installing and using
the software.
4-4