Installing The Device Driver For Windows 2000; Installing The Driver - Adaptec 9110G User Reference

Adaptec Fibre Card 9110G User's Reference
Installing the Device Driver
for Windows 2000
Before installing the Adaptec Fibre Card 9110G driver, Windows
2000 should be installed.
Note: You cannot install the operating system to a drive
attached to the Adaptec Fibre Card 9110G.

Installing the Driver

To install the Adaptec Fibre Card 9110G driver:
1
Turn the system after installing the Adaptec Fibre Card
ON
9110G.
2
Log into an account with administrative privileges.
Windows 2000 will automatically discover the new hardware
and start a Found New Hardware Wizard to guide you
through the device driver installation.
3
At the Welcome to the Found New Hardware Wizard window,
select Next.
4
The window should say:
This Wizard will complete the installation for this device:
Fibre Channel Controller
It will ask,
What do you want the wizard to do?
Choose Search for a suitable driver for my device
(recommended), and select Next.
5
For optional search locations, deselect Floppy disk drives and
CD-ROM drives. Select Specify a location, and then select
Next.
6
Insert the Adaptec Fibre Channel Driver disk into the floppy
drive.
14