Installing The Software Driver For Windows 2000 - Adaptec AAA-UDMA Install Manual

Adaptec aaa-udma raid controllers: install guide

Hide thumbs Also See for AAA-UDMA:

Table of Contents

Installing the Software

Driver for Windows 2000

In this Chapter

Installing the Array1000UDMA Driver for Windows 2000 5-2

Windows 2000 Installation and Configuration Notes

This chapter explains how to install the Array1000UDMA software

driver (cdaudma.sys) for Windows 2000. Before installing the driver,

make sure you have completed the following:

Installed the AAA-UDMA RAID card in your system. (See

Chapter 2)

Created the first array using the ARRAYCONFIG UDMA

utility, if you plan to boot from an array. (See Chapter 3)

Once Windows 2000 and the driver are installed, install

Adaptec CI/O Management Software and use it to add, delete, and

manage arrays from the server console (CI/O is required for array

management in order to provide the proper level of fault tolerance

and event notification). Refer to the Adaptec CI/O Management Software

User's Guide for instructions on installing and using the software.

5-6

5-1

Table of Contents