Table of Contents
Advertisement
When to Use SCSISelect
Use SCSISelect if you need to
Change any of the default values
Check or change SCSI device settings that may conflict with
those of other devices (e.g., SCSI ID)
Perform low-level formatting on new SCSI disk devices
Starting SCSISelect
To start SCSISelect, press Ctrl+A when the BIOS banner appears dur-
ing bootup, as shown in Figure 3-1.
Adaptec AHA-3940U/3940UW BIOS v1.22
(c) 1996 Adaptec, Inc. All Rights Reserved.
Press <Ctrl><A> for SCSISelect(TM)Utility!
SCSI ID #0 - MAXTOR
SCSI ID #2 - QUANTUM
SCSI ID #3 - Toshiba
SCSI ID #4 - ARCHIVE
BIOS Installed Successfully!
The BIOS banner lists the model number and SCSI ID of each SCSI
device connected to the host adapter.
AHA-3940U/3940UW/3940UWD User's Guide
Stock Number: 511041-00, Rev. B
Print Spec Number: 494569-00
Current Date: 2/14/97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuring Your Host Adapter
P1-17S
- Drive C:
P40S-94-40-04xx
- Drive D:
CD_ROM:XX3355
VIPER 150
21247
Figure 3-1. BIOS Banner
Page: 3-3
ECN Date: 2/17/97
(80h)
(81h)
3-3
Advertisement
Table of Contents
