Table of Contents
Advertisement
AHA-3940U/3940UW/3940UWD User's Guide
Configure/View Host Adapter Settings
From the Options menu, select Configure/View Host Adapter
Settings to see the Configuration menu, shown in Figure 3-4. This
menu lists the following settings under SCSI Channel Interface
Definitions:
Host Adapter SCSI ID: Change the SCSI ID of the channel
from its default ID of 7.
SCSI Parity Checking: Enable or disable parity checking.
Host Adapter SCSI Termination: Enable or disable channel
termination. The default is Automatic.
Adaptec AHA-3940 Ultra/Ultra W
AHA-3940 Ultra/Ultra W at Bus:Channel 01:A
Configuration
SCSI Channel Interface Definitions
Host Adapter SCSI ID ...................................
SCSI Parity Checking ...................................
Host Adapter SCSI Termination ......................
Additional Options
Boot Device Options.....................................
SCSI Device Configuration ...........................
Advanced Configuration Options ...................
<F6> - Reset to Host Adapter Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * =default)
Figure 3-4. Configure/View Host Adapter Settings Screen
Current settings appear in the right column. In Figure 3-4, for exam-
ple, the setting for SCSI Parity Checking is Enabled. To change a set-
ting, press the ↑ and ↓ keys to highlight the setting; press Enter to
display a pop-up menu of choices; and then choose a setting by
highlighting it and pressing Enter. The following sections in this
chapter have information about each setting.
Note:
Channel default settings are marked with an asterisk
(*) throughout the menus. Press F6 to reset all settings to the
channel defaults.
3-6
AHA-3940U/3940UW/3940UWD User's Guide
Stock Number: 511041-00, Rev. B
Print Spec Number: 494569-00
Current Date: 2/14/97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCSISelect(TM)
Utility v1.22
7
Enabled
Automatic
Press <Enter>
Press <Enter>
Press <Enter>
Page: 3-6
ECN Date: 2/17/97
Advertisement
Table of Contents
