Exiting Fcselect; Using Fcselect Settings; Fcselect Device Configuration - Adaptec 9210LP User Reference

Exiting FCSelect

1
Choose Save Changes and Reboot to save configuration
changes you've made and reboot your system
2
Choose Discard Changes and Reboot to return to previous
configuration setting and reboot your system.
3
Press ESC or choose Return to the Main Menu to continue
using FCSelect.

Using FCSelect Settings

To select an option, use the arrow keys to move the cursor to the
option. By pressing the Space Bar key, you can toggle the option.
In some cases, selecting an option displays another menu. You can
return to the previous menu at any time by pressing Esc.
To restore the original FCSelect default values, press F6 from the
main FCSelect screen.

FCSelect Device Configuration

The following are changeable FC card settings:
FC card INT 13h support—(Default: Disabled) Enables or
disables the FC card BIOS.
Change this option to Enabled to allow the FC BIOS to scan
and initialize the FC devices on the loop. When the FC BIOS
is enabled, it will provide INT 13 support for the first 8
devices detected.
Leave this option set to Disabled if the FC devices on the FC
loop are intialized by OS drivers. Use this setting when the
Adaptec Fibre Card 9210LP is set up in a multi-initiator
configuration.
Using FCSelect and Disk Utilities
15