Removing The Driver - Adaptec P2280A Manual

Ultra160 Family Manager Set User's Guide

Removing the Driver

If you no longer need the adst21 or adst70 driver, you can use the
following procedure to remove it completely:
1
Back up all important computer files.
2
At the UnixWare root prompt, type the following:
For UnixWare 2.1x:
/etc/conf/bin/idinstall -d adst21
The following files will be deleted:
/etc/conf/mdevice.d/ adst21
/etc/conf/pack.d/ adst21 /Driver.o
/etc/conf/pack.d/ adst21 /space.c
/etc/conf/pack.d/ adst21 /disk.cfg
/etc/conf/sdevice.d/ adst21
For UnixWare 7.01/7.1:
/etc/conf/bin/idinstall -d adst70
The following files will be deleted:
/etc/conf/mdevice.d/ adst70
/etc/conf/pack.d/ adst70 /Driver.o
/etc/conf/pack.d/ adst70 /space.c
/etc/conf/pack.d/ adst70 /disk.cfg
/etc/conf/sdevice.d/ adst70
3
Then, rebuild the kernel (0 in -g0 is zero, not the letter O):
/etc/conf/bin/idbuild -B -K
cp /etc/conf/cf.d/unix /unix
cd /
shutdown -g0
4
Reconfigure your computer for your alternate or replacement
drive controller, and reboot the computer.
5-8