Table of Contents
Advertisement
Installation Guide
Click OK.
S
14
TEP
When the installation is complete, remove the disk, shut down
S
15
TEP
Windows NT, and Click Yes to reboot the system and start the
driver.
Removing the Driver
In certain situations you might need to remove the device driver.
Follow these steps to remove the driver:
Start Windows NT and log into an account with administrative
S
1
TEP
privileges.
From the Start button, select Settings.
S
2
TEP
From the Settings menu, select Control Panel.
S
3
TEP
From the Control Panel window, select SCSI Adapters icon.
S
4
TEP
From the SCSI Adapters window, select Drivers tab.
S
5
TEP
Select Adaptec 1Gb/2Gb Family PCI Fibre Channel Controller
S
6
TEP
(NT4.0).
From the Drivers window, select Remove.
S
7
TEP
Click on Yes to remove the driver.
S
8
TEP
When you are finished, shut down Windows NT, and reboot the
S
9
TEP
system to remove the driver.
12
Advertisement
Table of Contents
