Removing The Driver - Adaptec 9110G User Reference

15
Click Yes to reboot the system.
16
When the installation is complete, remove the disk, shut down
Windows NT, and reboot the system to start the driver.

Removing the driver

In certain situations you may need to remove the device driver.
Follow these steps to remove the driver:
1
Start Windows NT and log into an account with administrative
privileges.
2
From the Start button, select Settings.
3
From the Settings menu, select Control Panel.
4
From the Control Panel screen, select SCSI Adapters icon.
5
From the SCSI Adapters window, select Drivers tab.
6
Select Adaptec AFC-9110G PCI 64-bit/66MHz Fibre Channel
1Gbit Controller.
7
From the Drivers window, select Remove.
8
Click on Yes to remove the driver.
9
When you are finished, shut down Windows NT, and reboot
the system to remove the driver.
Installing the Device Driver for Windows NT 4.0
13