Installing The Device Driver - Adaptec 2126700 Installation Manual

Installing the Device Driver

Before you can begin using your ASH-1233 adapter and ATA drives, you
must install the device driver. Follow the instructions provided for your
operating system (OS):
For Windows XP, see below.
For Windows 2000, see
For Windows Me, see
For Windows 98SE, see
Note:
For more detailed instructions and for instructions on
verifying driver installation, refer to the User's Guide on the CD.
To complete the installation while installing a new OS, refer to the
file on the CD.
Readme
Windows XP
When you power on your computer, Windows automatically detects the
new adapter and opens the New Hardware Installation Wizard.
To complete the device driver installation:
1 Insert the Adaptec ASH-1233 CD into your CD-ROM drive.
2 In the Wizard, click Install the software automatically..., then click
Next.
3 If a message appears indicating that the driver is not digitally signed,
click Continue Anyway.
4 When the installation is complete, click Finish.
page 14.
page 14.
page 15.
13