Advertisement
Troubleshooting
If you have any problems while installing the Adaptec SCSI Card
29320ALP, check the following items first:
Are all SCSI devices powered on?
Are all SCSI cables and power cables properly connected?
Does each device on each SCSI bus have a unique SCSI ID?
Does the total SCSI cable length exceed the maximum allowable
length?
Is the SCSI bus properly terminated?
If you are still unable to resolve a problem, contact the system
manufacturer for help.
Adaptec SCSI Card Driver Software
Note: To use the Adaptec SCSI Card 29320ALP, driver
software must be installed for your operating system.
Installation of the driver software varies depending on how
and where you purchased the Adaptec SCSI Card 29320ALP.
Preloaded Adaptec Drivers
If the Adaptec SCSI Card 29320ALP was included as part of a
computer system you purchased, the system already has the
appropriate Adaptec driver preinstalled by the computer
manufacturer. No further action is necessary to install the driver.
Embedded Adaptec Drivers
Some operating systems have embedded driver support for the
Adaptec SCSI Card 29320ALP. To determine if the card is
supported by the operating system you are using, read the
operating system manual or contact the operating system vendor
for information.
10
Advertisement
