Table of Contents
Advertisement
2740w-ig.doc Black 32
AHA-2740W/2742W/2744W
Troubleshooting Checklist
Most problems that might occur during installation can
be traced to errors in preparing devices on the SCSI bus.
The following suggestions should help you to solve any
problems that you may encounter. If a problem occurs
during installation, check the following items first:
1
Be sure all SCSI devices are connected to power.
Connect internal devices to your computer's power
supply; plug external devices into a grounded line
power outlet.
2
Be sure all cables are properly connected. Check
both power and SCSI interface cables.
3
Be sure the SCSI devices and host adapter are each
set to different SCSI IDs.
4
Check SCSI bus termination. The ends of the SCSI
bus must be terminated.
5
If you have installed more than one SCSI host
adapter, make sure that each is set to a separate
BIOS base address, or disable the BIOS on all but
one of the host adapters.
32
Advertisement
Table of Contents
